Centre Punch Square Head



  • Manufactured from high qualit carbon steel, hardened and tempered to 45-52 HRC for optimal durability.
  • Knurled body for firm gripping.
  • Used for marking the centre point of the hole to be drilled.
  • Prevents the drill bit from skidding on the surface of the workpiece thus enabling a smooth and clean operation.
  • Chamfered striking end to prevent impact failure.
  • Square head provides larger striking surface for the hammer and prevent rolling.
  • Rust preventive black oxide finish.
Centre Punch Square Head
Centre Punch Square Head

45-52º

Carbon Steel


C.no Oal Diameter Head Size Action
  inch mm inch mm inch mm  
CP-S-0116I 4 100 1/16 1.6 3/8 9.5
CP-S-0564I 4 100 5/64 2.0 3/8 9.5
CP-S-0332I 4 100 3/32 2.4 3/8 9.5
CP-S-0964I 4 100 9/64 3.6 3/8 9.5
CP-S-0532I 4 100 5/32 4.0 3/8 9.5
CP-S-0180I 4 100 1/8 3.2 3/8 9.5
CP-S-0316I 4-1/2 115 3/16 4.8 7/16 11.0
CP-S-Q 5 125 1/4 6.3 9/16 14.0
CP-S-S5 5pc Set including sizes from 1/16 to 5/32 inches of diameter of taper