Side Lock Adaptors/ End mill Holders



  • Manufactured from Case hardening steel
  • Duly tempered and hardened to 58±2 HRC
  • Available in types AD & AD/B
  • BALANCING:
    • STANDARD G6.3@15000 RPM
    • G2.5@25000RPM ON REQUEST
  • Available Shank types
    • MAS 403 BT (JIS 6339)
      • Standard
      • Dual Contact
    • ISO (DIN 2080)
    • CAT (ASME B5.50)
    • SK (DIN 69871)
Side Lock Adaptors/ End mill Holders
Side Lock Adaptors/ End mill Holders

G6.3@15000RPM

58±2º

Case Hardening Steel

JIS:6339, DIN:69871 DIN:2080

0.005 mm


Side Lock Adaptors

Side Lock adaptors transfer the machine spindle's motion to the tool. The tapered body of the adaptor attaches to the spindle by means of a pull stud and thus rotates along. The weldon shank tool (like endmills and annular cutters) is mounted onto the adaptor by means of a grub screw.

Double lock adaptors facilitates firm gripping of the straight shanked tools by means of two grub screws.

Dual Contact Holders

Dual Contact Holder eliminates the gap between the flange and the machine spindle thus resulting in two contact surfaces; the taper and the flange.The resulting setup offers higher rigidty both radially and axially thus boosting it's stability. The vibrations are reduced and the tool life increases.Higher bending stiffnes allows for higher machining speeds and accessibility to extended lengths without compromising the finish quality and the tool life.

 

 

C.no DESCRIPTION

D

(mm)

action
Shank

(mm)

BT TYPE

CA-SLA-BT30L50 BT 30 50 8,10
CA-SLA-BT30L55 BT 30 55 12
CA-SLA-BT30L63 BT 30 63 16,20
CA-SLA-BT40L30 BT 40 30 16
CA-SLA-BT40L45 BT 40 45 20,25
CA-SLA-BT40L50 BT 40 50 6,8
CA-SLA-BT40L63 BT 40 63 10,12,14,16,18,20
CA-SLA-BT40L90 BT 40 90 25
CA-DLA-BT40L90 BT 40 90 20,25,32,40
CA-SLA-BT40L100 BT 40 100 32
CA-SLA-BT40L160 BT 40 160 6,8,10,12,14,16,18,20,25
CA-SLA-BT50L65 BT 50 65 6,8,10
CA-SLA-BT50L80 BT 50 80 12,14,16,18,20
CA-SLA-BT50L100 BT 50 100 25
CA-SLA-BT50L105 BT 50 105 32
CA-DLA-BT50L105 BT 50 105 20,25,32,40
CA-SLA-BT50L115 BT 50 115 40
CA-SLA-BT50L160 BT 50 160 8,10,12,16,20,25,32

ISO TYPE

CA-SLA-ISO40L50 ISO 40 50 10,12,14
CA-SLA-ISO40L63 ISO 40 63 16,18,20
CA-SLA-ISO40L80 ISO 40 80 25,32
CA-SLA-ISO40L90 ISO 40 90 40
CA-SLA-ISO50L63 ISO 50 63 10,12,14,16,18,20
CA-SLA-ISO50L80 ISO 50 80 25,32
CA-SLA-ISO50L90 ISO 50 90 40

SK TYPE

CA-SLA-SK40L50 SK 40 50 6,8,10,12,14
CA-SLA-SK40L63 SK 40 63 16,18,20
CA-SLA-SK40L100 SK 40 100 25,32
CA-SLA-SK40L120 SK 40 120 40
CA-SLA-SK40L160 SK 40 160 6,8,10,12,16,20,25
CA-DLA-SK40L90 SK 40 90 20,25,32,40
CA-SLA-SK50L63 SK 50 63 6,8,10,12,16,18,20
CA-SLA-SK50L100 SK 50 100 32,40
CA-SLA-SK50L160 SK 50 160 6,8,10,12,16,18,20,25,32
CA-DLA-SK50L1055 SK 50 105 20,25,32,40