Collets are clamping units used for holding cylindrical tool shanks. Provides firm clamping by elastic compression; Easy and rapid tool replacement.
Collets are used for clamping cylindrical tool shafts onto machine spindles with the help of adaptors
Collet chucks are used with collets to hold a range of cylindrical shanked tools. Akros adaptors come pre-balanced at G6.3@15000 RPM; Finer balancing on request
Side Lock Adaptors are used to clamp tools with straight or weldon shanks using grub screws. Akros Side lock adaptors come pre-balanced at G6.3@15000RPM
Combi Shell arbours are used for cutters with keyways or driving slots. Akros Adaptors have a standard balancing of G6.3@15000 RPM; Finer balancing on request.
Akros Shrink Fits use the metal's thermal properties to form a firm grip over the tool; Superior clamping forces and concentricity within 3µm. G6.3@15000 RPM.
Akros Morse taper adaptors are available from MT1 to MT5 with a standard balancing of G6.3@15000 RPM; Finer balancing available on request
Akros Drill chuck arbors are precision ground for a smooth and secure clamp. They come pre-balanced at of G6.3@15000 RPM; Finer balancing available on request.
Compensates any length variation by axial expansion or compression; Increases tool's life and thread finish; Quick mount mechanism reduces machine's ideal time.
HSK Collet chucks are used with collets to hold a range of cylindrical shanks. Akros HSK adaptors come pre-balanced at G6.3@20000 RPM; Finer balancing on request
HSK Side Lock Adaptors are used to clamp tools with straight or weldon shanks. Akros HSK adaptors come pre-balanced at G6.3@20000 RPM; Finer balancing on request
Combi Shell arbours are used for cutters with keyways or drive slots. Akros HSK adaptors come pre-balanced at G6.3@20000 RPM; Finer balancing on request
Akros Shrink Fits use the metal's thermal properties to form a firm grip over the tool; Superior clamping forces and concentricity within 3µm. G6.3@20000 RPM.
HSK Morse adaptors conforming to DIN:69893 available in MT1 to MT5 taper. Akros HSK Adaptors come pre-balanced at G6.3@20000 RPM; Finer balancing on request
Conforming to IS:3793 Akros provides an extensive range of centres for your specific load and speed requirements. Female, carbide and extended points available.
Akros CNC Revolving centres are useful for supporting long workpieces rotating at high speeds of upto 4500 rpm. Runout within 15µm
Akros CNC revolving centres allow for heavy working loads at high speeds (up to 4500 RPM). Interchangeable points for rapid multiple operations; 15µm runout
Akros Pipe Centres are useful for holding pipes or shafts with large internal bore. Allows speeds upto 700 RPM; Higher speed centres on request; 15µm runout.
Akros Dead Centres conforming to IS: 2289-1976 are available with half, full, female and special points. Single body rigid construction provides accurate turned parts.
Akros Carbide tip Dead centres conforming to IS: 2534 are available with half, full, bull nose and special points. Carbide increases tip's durability; 15µm runout
Akros CNC Dead Centres provided with spanner flats and draw off nuts for easy removal from the tailstock. Extended points available for higher tool clearance.
Conforming to IS:9097-1979 Akros Drill chuck arbors are precision ground to ensure close fit and a firm clamp.
Mount smaller tapered shanks to larger tapered spindles. Conforming to IS:6702 Akros A-Grade sleeves are ground internally & externally to ensure a close fit and a firm clamp.
Extension sleeves are used to mount tapered shank components onto smaller or larger tapered machine spindles. Can be used to increase the reach of the tool.
A drill drift is a wedge shaped tool used for knocking loose male tapered shanks from slotted sleeves and sockets.
Akros Quick Change tool posts & holders are precision ground for a smooth fit and rapid replaceability. The set includes two standard, a parting and a boring holder.
Used for clamping parting bits for grooving or parting operations and for heavy depth of cuts
A Fly cutter holder is used with milling machines for the purpose of sweeping the cutting tool over a larger surface area in a single pass for a finer finish.
Akros offset boring head is used for boring accurate holes with close diametrical tolerances. Comes with a clearly marked dial screw having a least count of 0.0005"
The set consists of a boring head fitted on a threaded shank along with two fly holders and a carbide tipped boring tool
Akros Drill chucks are useful for manually mounting and dismounting drills rapidly and easily without the need for a key.
Akros Lathe dogs are manufactured from malleable iron and are used to transfer the machine spindle's rotary movement to the workpiece held between centres.
A tap is used to cut screw threads on the internal surface of a bore, creating a female surface which functions like a nut; Types: Taper, Plug & Bottom
The Round or Hex Dies are used to cut screw threads onto a cylindrical shaft. They are available in Carbon steel and HSS body in various thread profiles.
An adjustable tap & reamer wrench is used to clamp square shanked tools. Long spindles and heavy build provide higher support when working with larger tools.
Used for holding taps for threading pre-drilled bores in confined spaces. Slim design and sliding T-bar provides easier access and higher maneuverability
Akros long tap wrenches are useful for increasing the reach of the tap and threading bores deep in confined spaces.
Used for manually threading a drilled bore at one machine location without moving the workpiece
Used for holding taps for threading pre-drilled bores. Ratchet mechanism prevents the tap from rotating in the opposite direction.
Round die stock holders are used to clamp threading dies to cut screw threads on the external surface of cylindrical shafts. A single holder can fit a variety of dies with various thread profiles.
Akros Hexagon Die Adapters convert round dies to hexagon dies where space is limited ruling out the need for conventional die stock holders.
Manufactured from high-quality carbon steel and used for transferring the pattern of the knurl onto the workpiece to facilitate higher gripping strength
Quick Acting knurling tool holder is designed for use with manual lathes and prevent the exertion of pressure on the lathe, compound, centre or the feed screw.
Used for forming knurling pattern on workpieces for increased gripping strength. Available in straight, spiral and diamond patterns.
Emery Wheel Dressers are used for dressing, deglazing, truing and sharpening abrasive wheels by declogging the wheel from workpiece residual and blunt grains.
Akros Pin chuck sets comes with three interchangeable collets for holding a range of small drills used for intricate jobs during jewellery and watchmaking.